Back to Blog

    Solar Panels in Kiama: What Local Homeowners Need to Know

    24 June 2026

    Solar Panels in Kiama: What Local Homeowners Need

    to Know

    Published: May 2026 | Reading time: 6 minutes

    Kiama is one of the best locations in the Illawarra for solar — which is saying something,

    because the whole region performs well. But there are a few things specific to Kiama that are

    worth knowing before you get a quote: the local sunshine profile, common roof types, and a

    consideration or two that occasionally catches homeowners out.

    Kiama's Solar Performance Profile

    Kiama sits in Climate Zone 5 with an average of approximately 250 clear or partly clear days per

    year. The average peak sun hours for Kiama are approximately 4.4 to 4.6 per day, which puts it

    in Zone 3 under the federal STC scheme — the same zone as Sydney.

    In practical terms, a 6.6 kW solar system in Kiama generates approximately:

    • Summer (December–February): 28–32 kWh per day average

    • Autumn/Spring (March–May, September–November): 22–26 kWh per day average

    • Winter (June–August): 14–18 kWh per day average

    • Annual total: approximately 8,000–9,000 kWh per year

    The coastal location means Kiama gets slightly more cloud cover than inland areas — but also

    benefits from cooler temperatures, which actually helps panel efficiency. Solar panels operate

    more efficiently when cool, and Kiama's sea breezes keep summer roof temperatures moderate

    compared to western suburbs of Wollongong.

    Common Roof Types in Kiama — and What They Mean for Solar

    Colorbond steel (most new estates): The easiest roof type for solar installation. Lightweight

    panel mounting clips directly onto the steel profile, no drilling required. Well-suited to all panel

    brands.

    Terracotta tiles (older homes, central Kiama): Requires tile hooks inserted under the tiles,

    which are then waterproofed. A reliable method but adds a small amount to installation cost and

    time. Some very old or brittle tiles need care — your installer will flag any concerns during a site

    assessment.

    Concrete tiles (1980s–2000s homes): Similar process to terracotta. Slightly heavier, which

    rarely causes structural issues but is worth noting for older homes.

    Flat or low-pitch roofs: Some Kiama homes, particularly newer builds closer to the waterfront,

    have lower-pitched roofs. Panels can be installed on tilted frames to achieve the optimal 20 to

    30-degree angle. Adds some cost but is routine.

    Milenix Solar Blog Collection | May 2026 | milenix.com.au | Page 15

    Roof Orientation in Kiama

    True north-facing is ideal for solar in Australia, and many Kiama suburbs — particularly Kiama

    Heights, Kiama Downs, and Jamberoo — have good north-facing roof sections due to how the

    streets were laid out.

    If your best available roof section faces east or west rather than north, this is still workable. East-

    facing panels generate well in the morning; west-facing panels peak in the afternoon when

    electricity demand (and prices, on time-of-use tariffs) is higher. Many Kiama installers now

    routinely recommend split east-west arrays that generate more consistently throughout the day

    than a north-only installation.

    Planning and Council Considerations

    Solar installations on residential properties in Kiama are generally considered exempt

    development under NSW planning rules — meaning no council approval is required. However,

    there are exceptions:

    • Heritage listed properties or properties in a heritage conservation area — check with

    Kiama Council or your installer

    • Some properties in sensitive coastal zones may have additional requirements

    • Systems larger than 10 kW may require additional grid connection approval from

    Endeavour Energy

    For the vast majority of standard Kiama homes, council approval is not required and your

    installer handles the Endeavour Energy grid connection paperwork as part of the installation.

    Real Installation: Kiama Heights

    To give you a sense of real-world numbers, here is a recent Milenix installation in Kiama

    Heights:

    • 6.6 kW system, north-facing roof, 22-degree pitch, Colorbond

    • 13.5 kWh battery added simultaneously

    • Total before rebates: $22,900

    • After STC rebate, federal battery rebate, and NSW VPP incentive: $17,010

    • Quarterly bill before: AUD 620. After installation (first quarter): AUD 88

    • Estimated annual saving: approximately AUD 2,100

    • Estimated payback: approximately 8.1 years

    What to Ask Your Installer

    When getting quotes for a Kiama solar installation, ask specifically:

    16. What shading analysis have you done for my specific roof? (A responsible installer uses

    design software, not estimates)

    17. What generation estimate are you using for my roof orientation and tilt? (Ask to see the

    site-specific calculation)

    18. Is my roof type standard for solar mounting, or does it require any special approach?

    Milenix Solar Blog Collection | May 2026 | milenix.com.au | Page 16

    19. Are there any local grid or council considerations I should know about?

    20. Will you process both the federal battery rebate and the NSW VPP incentive if I include a

    battery?

    The Bottom Line

    Kiama is a strong solar location with good sunshine hours, predominantly suitable roof types,

    and straightforward planning requirements. The combination of federal and state rebates makes

    2026 an excellent time to install, and the coastal climate's moderate temperatures mean panels

    perform well year-round.