Back to Blog

    How to Read Your Electricity Bill — And See Exactly What Solar Would Save You

    13 October 2026

    How to Read Your Electricity Bill — And See Exactly What Solar Would Save You

    Published: October 2026 | Reading time: 7 minutes

    Most of us open the electricity bill, look at the amount due, and put it in the "deal with later" pile. That's understandable. Bills are crowded with codes, rates and abbreviations, and it's hard to tell which bits matter.

    But if you're thinking about solar, your bill is the most useful document you own. It tells you what you pay per unit, how much of your cost is fixed, and when you use power. With three numbers off it, you can work out roughly what solar would save you before anyone visits your home. This guide walks through it, using a worked example for a typical Illawarra household.

    First, Who Is Your Network?

    Most homes in Wollongong, Shellharbour, Kiama, Dapto and the wider Illawarra are on the Endeavour Energy network. Your retailer (the company that sends the bill) can be anyone, but the poles and wires are Endeavour's. You'll see it listed as your "distributor" on the bill. It matters because network charges are built into the rates you pay.

    The Six Things to Find on Your Bill

    Layouts differ between retailers, but every bill has the same building blocks. Look for these:

    What to findWhat it's calledWhy it matters for solarBilling period"Bill period" or "Days in period" (often 90 or 91 days)Lets you convert the bill into a daily or yearly figureFixed charge"Supply charge" or "Daily charge" (cents per day)Solar does not reduce thisUsage charge"Usage" or "Consumption" (cents per kWh)This is the cost solar offsetsTotal usagekWh used in the periodTells you how big a system suits youTariff typeSingle rate, Time of Use, or DemandDecides which hours are expensiveSolar credit"Feed-in" or "Solar export" (cents per kWh)What you're paid for power you send to the grid

    If you have a smart meter, your retailer's app or website usually shows hourly usage as well. That's the best view of when you actually use power.

    Number 1: Your Usage Rate

    This is the price you pay for each kilowatt-hour (kWh) from the grid. Across retailers on the Endeavour network in 2026, single-rate plans run from about 23c to 38c per kWh, including GST (rates vary by retailer and plan, and change over time).

    On a Time of Use plan, the price depends on the hour:

    • Peak (typically late afternoon and evening): roughly 33c to 53c per kWh

    • Shoulder: roughly 25c to 45c per kWh

    • Off-peak (overnight and some daytime): roughly 9c to 35c per kWh

    Every kWh your panels produce and you use at home is a kWh you don't buy at one of those rates. That's where most of the saving comes from.

    Number 2: Your Daily Supply Charge

    This is a fixed fee for being connected to the grid, charged every day whether you use power or not. On the Endeavour network it ranges from roughly $1.00 to $2.05 per day across retailers, so $90 to $185 over a 90-day quarter.

    Solar can't remove this charge. A battery and solar system can bring your usage charge close to zero on a good day, but the supply charge still arrives. It's the main reason a "zero bill" is rare unless you're willing to go off-grid, which most people aren't.

    Number 3: Your Solar Feed-in Tariff

    If you already have solar, this is the credit for power you export. If you don't, it's what you'd receive.

    The independent regulator IPART's 2026–27 benchmark for an all-day feed-in tariff is 3.4 to 6.5 cents per kWh. Retailers aren't required to stay within that range. Some offer more, some less. Compare that to paying 30c or more to buy power back from the grid, and you can see why using your own solar is worth more than exporting it.

    What About the Solar Sharer Offer?

    From 1 July 2026, households in NSW can access the Solar Sharer Offer: a regulated plan that includes three hours of free electricity a day, from 11am to 2pm, for customers with a smart meter.

    It's worth knowing about, and it can suit people who are home in the middle of the day. But it doesn't replace solar. If you're out during the day, free midday power helps less, and the rest of your usage is still charged. If you have panels, check how a plan treats your exports and your other hours before switching, rather than assuming free power is the better deal. Market offers sometimes have better feed-in rates.

    A Worked Example: A Typical Illawarra Household

    Here's the arithmetic using round, illustrative numbers. Say a household in Dapto has no solar and a quarterly bill that looks like this:

    • 90-day billing period

    • Usage: 1,350 kWh (15 kWh a day) at 32c per kWh

    • Supply charge: $1.30 per day

    ItemCalculationCostUsage1,350 kWh × $0.32$432Supply charge90 days × $1.30$117Bill without solar$549

    Now suppose they install a 6.6 kW system. Assume (for illustration) that on an average day the panels cover about 6 kWh of the household's own use, and export the rest at 5c per kWh. A 6.6 kW system in the Illawarra typically produces somewhere around 24 kWh a day averaged across the year, so roughly 18 kWh is exported.

    ItemCalculationCost / creditUsage still bought from grid810 kWh × $0.32$259Supply charge (unchanged)90 days × $1.30$117Solar export credit1,620 kWh × $0.05–$81Bill with solar$295

    That's about $254 a quarter, or roughly $1,000 a year, in this example. (Illustrative figures only. Estimates based on current rates and may vary with your retailer, tariff, usage pattern and the weather.)

    Two things stand out. First, the supply charge didn't move at all. Second, most of the saving came from the 6 kWh a day the panels covered directly. Only a small part came from exports. The more of your own solar you use, the better the result.

    How to Estimate Your Own Saving in Five Minutes

    Grab your latest bill and a calculator.

    1. Find your daily usage. Divide total kWh by the number of days in the period.

    2. Find your usage rate. If you're on Time of Use, pick the rate for the hours the sun is up (usually shoulder or off-peak, with some peak in late afternoon).

    3. Estimate how much you use during daylight. A smart meter app is ideal. If you don't have one, a rough guide is that a household out all day uses 25–35% of its power while the sun is up, and a household with someone home or working from home can use 40–60%.

    4. Multiply. Daylight kWh used × usage rate × days = money saved on usage.

    5. Add the export credit. Exported kWh × feed-in tariff. Expect this to be the smaller figure.

    If your evening use is high, a battery changes step 3, because it lets you shift daytime generation into the evening. See our battery payback article for how that works out in dollars.

    Things That Skew the Numbers

    • Solar size matters less than usage. A bigger system isn't automatically better. If most of your use is in the evening, extra panels mostly add exports at a low rate. Our guide to what size system an Illawarra home actually needs covers this.

    • Seasonal bills. One quarter can mislead. Summer and winter bills differ, so look at 12 months if you can.

    • Rate changes. Retailers adjust rates on 1 July each year and sometimes at other times. Use your current rate, not an old one.

    • Demand tariffs. If your bill shows a "demand charge" (priced per kW), a straightforward estimate is harder. Ask for a proper assessment rather than relying on the quick method above.

    The Bottom Line

    • Your bill has three numbers that matter for solar: your usage rate, your supply charge, and your feed-in tariff

    • Solar saves you the usage charge on power you use directly and earns a small credit on exports. It can't remove the supply charge

    • In our example, a typical Illawarra household saves roughly $1,000 a year with a 6.6 kW system, but your figures depend on your tariff and when you use power

    • The more daytime power you use yourself, the more solar is worth

    • Free midday power plans can complement solar, but check how they treat your exports before switching

    If you'd rather not do the sums yourself, send us a copy of your bill and we'll work it out for you.


    Want to see exactly what solar would save on your bill? Get an honest, no-pressure quote from Milenix. Send us a recent bill and we'll show you real numbers for your home.


    Milenix Solar, Illawarra NSW