Back to Blog

    Battery Inspection Compliance — What the New Rules Mean for Illawarra Homeowners

    10 September 2026

    Battery Inspection Compliance — What the New Rules Mean for Illawarra Homeowners

    Published: August 2026 | Reading time: 7 minutes

    Home batteries have taken off across Australia over the past year, and the Cheaper Home Batteries Program has been a big reason why. But rapid growth has come with a real problem: a lot of installations haven't been done properly. In response, the government has committed extra funding to battery inspections, and the regulator has been ramping up checks. Here's what's actually going on, and what it means if you're installing — or already own — a battery in the Illawarra.

    Why This Became an Issue

    Between July 2025 and April 2026, the Clean Energy Regulator (CER) carried out 1,278 compliance inspections on batteries installed under the federal rebate program. The results weren't reassuring: 60.8% of inspected installations were found to be substandard, and 1.2% were assessed as unsafe.

    Importantly, the issues found weren't generally about the batteries themselves failing or being poor quality — they were about how they'd been installed. The most common problems were things like:

    • Missing or incorrect warning labels

    • Unlabelled backup circuits

    • Missing or incorrectly positioned energy storage (ES) labels

    These sound like small, paperwork-style issues, but correct labelling exists for a reason — it tells emergency services, future tradespeople, and the household itself what they're dealing with in the switchboard, particularly in an emergency. A mislabelled backup circuit isn't just an administrative slip; it's the kind of thing that matters if something goes wrong down the track.

    What the Government Has Actually Funded

    As part of the May 2026 Federal Budget, the government committed AU$14.6 million over five years from 2025–26 (plus a further $0.7 million in 2030–31) specifically to maintain what's described as "proportionate battery systems inspections" under the Cheaper Home Batteries Program. This sits alongside — and is separate from — the household rebate itself, which was unaffected by the broader budget cuts covered in our article on the May 2026 budget.

    In practical terms, this funding supports the CER continuing and expanding its inspection program under the Small-scale Renewable Energy Scheme (SRES), which now covers batteries as well as solar panels.

    What "Compliance" Actually Covers

    The compliance framework isn't new — it's an extension of the same system that's applied to solar panel installations for years — but it now applies fully to batteries. It requires:

    • Batteries to be listed on the Clean Energy Council's approved products list

    • Installers to hold the appropriate accreditation from Solar Accreditation Australia (SAA)

    • The CER to carry out inspections and share data with state and territory electrical safety regulators

    • The CER to have the power to declare specific installers, retailers, or battery models ineligible for the program in response to safety, cyber security, or other risks

    If your battery was installed under the federal rebate, it should already have gone through a Certificate of Electrical Compliance process — this isn't a new hoop for homeowners to jump through, but the inspections happening after the fact are becoming more common and more thorough.

    What This Means If You're Installing a Battery Now

    For anyone in Wollongong, Dapto, Shellharbour, or elsewhere in the Illawarra planning an installation, the practical impact is mostly about who you choose to install it, not extra steps you personally need to take:

    • Confirm your installer holds current SAA accreditation

    • Confirm the battery model is on the CEC-approved products list at the time of installation

    • Ask to see the Certificate of Electrical Compliance once the job is done, and check that switchboard labelling looks complete before the installer leaves

    • Keep your paperwork — invoice, compliance certificate, and any correspondence — in case of a future inspection

    None of this should add meaningful cost or delay to a job done properly. It mostly matters if you're dealing with an installer cutting corners, which is exactly the group these inspections are aimed at.

    What This Means If You Already Have a Battery Installed

    If your battery was installed some time ago, there's no new action required on your part by default. The CER's inspection program targets installations for compliance auditing on an ongoing basis rather than requiring homeowners to proactively re-certify existing systems. That said, if you have any doubts about your original installation — particularly around labelling or whether your installer was properly accredited at the time — it doesn't hurt to check your paperwork or ask your installer to confirm.

    Why This Is Actually a Good Thing for Homeowners

    It's easy to read "60.8% substandard" as an alarming headline, but the more useful way to think about it is this: the scheme is now actively finding and addressing exactly the kind of shortcuts that could cause problems down the line, before they become widespread. A properly funded, active inspection regime is a sign the scheme is maturing, not a sign it's in trouble. For homeowners working with a reputable, CEC-accredited installer, this change should be invisible in day-to-day terms — it's the installers cutting corners who have the most to worry about.

    The Bottom Line

    • Battery inspections have found labelling and documentation issues in a majority of checked installations — mostly paperwork and labelling problems, not battery hardware failures

    • The government has committed $14.6 million over five years to keep inspections running as the program scales up

    • For homeowners, the main practical step is choosing an installer with current SAA accreditation and keeping your compliance paperwork

    • This funding is separate from, and doesn't reduce, the household battery rebate itself

    If you're getting quotes for a battery, it's reasonable to ask directly about an installer's accreditation status and to see documentation on the products they're proposing — a straight answer to that question tells you a lot about who you're dealing with.


    Thinking about a battery for your Illawarra home and want it done properly the first time? Get an honest, no-pressure quote from Milenix — CEC-accredited installation, real numbers, no shortcuts.


    Milenix Solar, Illawarra NSW